<\/span><\/h3>\nTo change the housing color of your iPhone, follow these steps:<\/strong><\/p>\n<\/p>\n- Turn off your iPhone and disconnect it from any power source.<\/li>\n
<\/p>\n
- Using the pentalobe screwdriver, remove the two screws located at the bottom of your iPhone.<\/li>\n
<\/p>\n
- Place a suction cup near the home button and gently pull upwards to create a small gap between the display assembly and the rear case.<\/li>\n
<\/p>\n
- Insert a plastic pry tool into the gap and carefully slide it around the edges of the iPhone to detach the display assembly.<\/li>\n
<\/p>\n
- Lift the display assembly up and support it at an angle using a small stand or something similar.<\/li>\n
<\/p>\n
- Unscrew the metal shield that covers the battery connector, and then disconnect the battery connector from the logic board. This step is crucial in order to avoid any potential damages during the replacement process.<\/li>\n
<\/p>\n
- Using the Phillips screwdriver, remove all the screws securing the various components, such as the camera, speaker, and connectors.<\/li>\n
<\/p>\n
- Once all the screws are removed, gently lift the motherboard out of the housing.<\/li>\n
<\/p>\n
- Disconnect all the remaining connectors and flex cables attached to the motherboard.<\/li>\n
<\/p>\n
- Remove the old housing by gently prying it away from the display assembly and the motherboard.<\/li>\n
<\/p>\n
- Place the new housing in position, ensuring that all the buttons and openings align properly.<\/li>\n
<\/p>\n
- Reassemble all the components and connectors in the new housing carefully.<\/li>\n
<\/p>\n
- Reverse the above steps to reattach the display assembly to the rear case.<\/li>\n
<\/p>\n
- Finally, screw in the two pentalobe screws at the bottom of your iPhone to secure the housing.<\/li>\n
\n<\/ol>\n
That’s it! Your iPhone now carries a completely new look with its changed housing color. Enjoy your refreshed device!<\/p>\n